潁璋 Cold Bending 園地
複循環火力發電廠高溫高壓主蒸氣管線在頻繁起停運轉下的劣化機制與結構優化研究——以 3D 冷作彎管與應力集中控制為核心 (Research on Degradation Mechanisms and Structural Optimization of High-Temperature and High-Pressure Main Steam Piping in Combined Cycle Power Plants Under Frequent Start-Stop Operations—Focusing on 3D Cold Bends and Stress Concentration Control)
摘要 / Abstract 隨著全球能源結構的快速
2026-08-31
CCPP 高能管線變更設計之適時性對策：以 4″ XXS P91/P92 冷作彎管取代對銲彎頭之工期與全生命週期效益評估 (Timeliness Strategies for High-Energy Piping Design Modifications in CCPP: An Evaluation of Schedule and Whole-Life Cycle Benefits of Replacing Butt-Welded Elbows with 4″ XXS P91/P92 Cold-Bent Pipes)
摘要 / Abstract 在現代複循環發電廠（C
2026-08-30
現代電廠高能管線（1.5D vs. 5D 彎管）之全方位最佳化設計：流體加速腐蝕解析、P91/P92潛變疲勞防護與 EPC 建廠佈局實務 Comprehensive Optimization Design of High-Energy Piping (1.5D vs. 5D Bends) in Modern Power Plants: Flow-Accelerated Corrosion Analysis, P91/P92 Creep-Fatigue Protection, and EPC Construction Layout Practices
摘要 / Abstract 流體加速腐蝕（Flow
2026-08-29
突破極端工況：先進 CCPP 高能管線彎徑標準化設計——基於 ASME B31J 應力解析與大中管徑分流工法之全生命週期效益 (Overcoming Extreme Operating Conditions: Standardized Bend Radius Design for Advanced CCPP High-Energy Piping—Lifecycle Benefits Based on ASME B31J Stress Analysis and Large/Medium Diameter Branching Methods)
一、 緒論 在全球能源轉型的宏觀背景下，燃氣複循環
2026-08-27