潁璋 Cold Bending 園地
核能電廠冷作彎管研究:釐清冷彎後熱處理（PBHT）與銲後熱處理（PWHT）在法規與物理機制上本質差異 (A Study of Cold-Bending Piping in Nuclear Power Plants: Clarifying the Fundamental Differences Between Post-Bend Heat Treatment (PBHT) and Post-Weld Heat Treatment (PWHT) in Regulatory and Physical Mechanisms)
一、 摘要 (Summary) 核能電廠之管線系統
2026-02-04
2026 ASME 規範架構下 6吋以下 (≤ 6″) 管件成型應變率 ε 之深度剖析：5D_XXS 冷作彎管 (IH-PBHT) 與 1.5D_XXS 電銲彎頭 (PWHT) 差異化分析報告 (Deep Analysis of Forming Strain Rate (ε) for Piping Components ≦ 6″ under 2026 ASME Codes: Comparative Study of 5D XXS Cold-Bent Pipe (IH-PBHT) vs. 1.5D XXS Welded Elbows (PWHT))
一、 摘要 (Summary) 本研究報告旨在針對
2026-02-03