潁璋 Cold Bending 園地
現代化高溫垃圾焚化爐與生質能電廠中雙金屬複合管 (SA-210 / Inconel 625) 之冷作彎管與感應加熱彎管後熱處理 (IH-PBHT) 冶金行為及 2026 ASME 規範合規性分析 (Metallurgical Behavior and 2026 ASME Code Compliance Analysis of Bimetallic Clad Tubes (SA-210 / Inconel 625) after Cold Bending and Induction Heating Post-Bending Heat Treatment (IH-PBHT) in Modern High-Temperature Waste-to-Energy and Biomass Power Plants)
摘要 在全球能源轉型、循環經濟與廢棄物管理的強烈需
2026-05-29
濱海極端鹽害環境下電廠管線工程可靠度研究：以西部麥寮燃氣電廠為例之冷作彎管與傳統電銲工法全生命週期效益深度分析 (A Comprehensive Life-Cycle Cost-Benefit Analysis of Cold-Bending and Conventional Welding Methods for Power Plant Piping Engineering in Extreme Coastal Saline Environments: A Case Study of the Mailiao Gas-Fired Power Plant in Western Taiwan)
一、緒論 1.1 產業背景與能源轉型之基礎建設挑戰
2026-05-28
2026 ASME 規範架構下 B31.1 & B31.3 成型應變率之深度剖析：5D 冷作彎管 (IH-PBHT) 與 1.5D 電銲彎頭 (PWHT) 差異化分析研究 (A Comparative Analysis of Forming Strain Rates under the 2026 ASME Code Framework: Induction Heated Pipe Bending (5D) versus Post-Weld Heat Treated Welded Elbows (1.5D))
一、 緒論與高溫高壓管線之產業背景 在現代尖端工業
2026-05-27