潁璋 Cold Bending 園地
基於 ASME B31J 規範CCPP 廠高壓蒸汽管線 P91 2″ XXS 5D 冷作彎管對比 1.5D BW 對銲彎頭應力強度因子與柔性因子演算對比 (A Comparative Evaluation of Stress Intensification Factors and Flexibility Factors for P91 2″ XXS 5D Cold-Bent Pipes and 1.5D Butt-Welding Elbows in CCPP High-Pressure Steam Piping Based on ASME B31J)
摘要 在現代複循環發電廠（Combined Cyc
2026-06-02
高固體含量聚丙烯粉體氣流輸送管線流體力學與熱力學行為研究：1.5D銲接彎頭與3D/5D長半徑彎管之幾何最佳化分析 (Investigation into Fluid Dynamics and Thermodynamic Behavior of High-Solids Polypropylene Powder in Pneumatic Conveying Pipelines: Geometric Optimization Analysis of 1.5D Welded Elbows vs. 3D/5D Long-Radius Bends)
一、 研究背景與動機 氣流輸送（Pneumatic
2026-05-29
現代化高溫垃圾焚化爐與生質能電廠中雙金屬複合管 (SA-210 / Inconel 625) 之冷作彎管與感應加熱彎管後熱處理 (IH-PBHT) 冶金行為及 2026 ASME 規範合規性分析 (Metallurgical Behavior and 2026 ASME Code Compliance Analysis of Bimetallic Clad Tubes (SA-210 / Inconel 625) after Cold Bending and Induction Heating Post-Bending Heat Treatment (IH-PBHT) in Modern High-Temperature Waste-to-Energy and Biomass Power Plants)
摘要 在全球能源轉型、循環經濟與廢棄物管理的強烈需
2026-05-29