Uncategorized

國光電廠二期擴建工程 P91/P92 管線預製冷作彎管技術之應用：基於 ASME B31.1 與 B31J 規範之應力強度因子優化與疲勞壽命分析 (Application of P91/P92 Pipe Prefabricated Cold-Bending Technology in the Phase II Expansion Project of Kuo-Kuang Power Plant: Stress Intensification Factor (SIF) Optimization and Fatigue Life Analysis Based on ASME B31.1 and B31J Codes)

Uncategorized /

一、 導論與先進複循環燃氣輪機動力管線之工程挑戰 在現代化高效率複循環燃氣輪機（Combined-Cycle […]

國光電廠二期擴建工程 P91/P92 管線預製冷作彎管技術之應用：基於 ASME B31.1 與 B31J 規範之應力強度因子優化與疲勞壽命分析 (Application of P91/P92 Pipe Prefabricated Cold-Bending Technology in the Phase II Expansion Project of Kuo-Kuang Power Plant: Stress Intensification Factor (SIF) Optimization and Fatigue Life Analysis Based on ASME B31.1 and B31J Codes) 閱讀全文 »

燃煤氣電共生廠改裝混加氫燃氣複循環系統：高能蒸汽管線P91/P92材料應力與3D/5D冷作彎管分析研究 —— 以 ASME B31.1 與 B31J 新制導入 (Retrofitting Coal-Fired Cogeneration Plants into Hydrogen-Blended Gas Turbine Combined Cycle Systems: Material Stress and 3D/5D Cold-Bent Pipe Analysis for High-Energy Steam Piping under ASME B31.1 and B31J Compliance)

Uncategorized /

一、 緒論與研究背景 在全球能源轉型的劇烈浪潮下，傳統燃煤發電正面臨嚴峻的脫碳與減排壓力。為達成淨零排放（Ne

燃煤氣電共生廠改裝混加氫燃氣複循環系統：高能蒸汽管線P91/P92材料應力與3D/5D冷作彎管分析研究 —— 以 ASME B31.1 與 B31J 新制導入 (Retrofitting Coal-Fired Cogeneration Plants into Hydrogen-Blended Gas Turbine Combined Cycle Systems: Material Stress and 3D/5D Cold-Bent Pipe Analysis for High-Energy Steam Piping under ASME B31.1 and B31J Compliance) 閱讀全文 »

複循環電廠後段飛灰輸送管線改採鋼管內襯陶瓷工法之可行性評估與施工品質控制 (Feasibility Assessment and Construction Quality Control of Retrofitting Downstream Fly Ash Conveying Pipelines with Ceramic-Lined Steel Pipes in Combined Cycle Power Plants)

Uncategorized /

一、緒論 在現代化的大型發電設施與能源轉換工業中，發電技術的演進與環境保護標準的提升促使各式高效能機組被廣泛採

複循環電廠後段飛灰輸送管線改採鋼管內襯陶瓷工法之可行性評估與施工品質控制 (Feasibility Assessment and Construction Quality Control of Retrofitting Downstream Fly Ash Conveying Pipelines with Ceramic-Lined Steel Pipes in Combined Cycle Power Plants) 閱讀全文 »

導入 ASME B31J 規範對燃氣輪機附屬管線應力密化係數 (SIF) 之影響，並比較冷作彎管與傳統銲接配件之抗振效益 (Impact of the ASME B31J Standard on Stress Intensification Factors (SIFs) for Gas Turbine Auxiliary Piping and the Vibration Mitigation Benefits of Cold-Bent Pipes vs. Welded Fittings)

Uncategorized /

一、 摘要與研究引言 在現代化的大型複循環發電設施 (Combined Cycle Power Plant,

導入 ASME B31J 規範對燃氣輪機附屬管線應力密化係數 (SIF) 之影響，並比較冷作彎管與傳統銲接配件之抗振效益 (Impact of the ASME B31J Standard on Stress Intensification Factors (SIFs) for Gas Turbine Auxiliary Piping and the Vibration Mitigation Benefits of Cold-Bent Pipes vs. Welded Fittings) 閱讀全文 »

高階合金鋼 (P91/P92) 小管徑管線冷作彎管工法之完整性評估與表面防護優化研究 (A Study on Integrity Assessment and Surface Protection Optimization of Cold Bending Processes for Small-Bore Advanced Alloy Steel (P91/P92) Piping)

Uncategorized /

一、 緒論與高溫服役環境之挑戰 隨著全球能源結構的轉型以及對溫室氣體排放標準的日益嚴苛，現代火力發電廠與核能發

高階合金鋼 (P91/P92) 小管徑管線冷作彎管工法之完整性評估與表面防護優化研究 (A Study on Integrity Assessment and Surface Protection Optimization of Cold Bending Processes for Small-Bore Advanced Alloy Steel (P91/P92) Piping) 閱讀全文 »

複循環發電廠管線安裝致命缺失與破壞行為之深度分析與研究 (An In-Depth Analysis and Study of Fatal Flaws and Sabotage in Combined Cycle Power Plant Pipeline Installation)

Uncategorized /

摘要 複循環發電廠（Combined Cycle Power Plants, CCPP）結合了氣渦輪機與蒸汽渦

複循環發電廠管線安裝致命缺失與破壞行為之深度分析與研究 (An In-Depth Analysis and Study of Fatal Flaws and Sabotage in Combined Cycle Power Plant Pipeline Installation) 閱讀全文 »

針對 P91 與 P92 鋼管之高溫力學與金相穩定性綜合評估：以 ASME B31J 為幾何力學基礎的材料退化與現場熱處理驗證 (Comprehensive Evaluation of High-Temperature Mechanical Properties and Metallurgical Stability for P91 and P92 Steel Pipes: Material Degradation and Field Heat Treatment Validation Based on ASME B31J Geometrical Mechanics)

Uncategorized /

導論：從宏觀力學標尺到微觀金相保證的工程典範轉移 在現代超臨界（Supercritical）與超超臨界（Ult

針對 P91 與 P92 鋼管之高溫力學與金相穩定性綜合評估：以 ASME B31J 為幾何力學基礎的材料退化與現場熱處理驗證 (Comprehensive Evaluation of High-Temperature Mechanical Properties and Metallurgical Stability for P91 and P92 Steel Pipes: Material Degradation and Field Heat Treatment Validation Based on ASME B31J Geometrical Mechanics) 閱讀全文 »

濱海極端鹽害環境下電廠管線工程可靠度研究：以西部麥寮燃氣電廠為例之冷作彎管與傳統電銲工法全生命週期效益分析 (A Comprehensive Life-Cycle Cost-Benefit Analysis of Cold-Bending and Conventional Welding Methods for Power Plant Piping Engineering in Extreme Coastal Saline Environments: A Case Study of the Mailiao Gas-Fired Power Plant in Western Taiwan)

Uncategorized /

一、緒論 1.1 產業背景與能源轉型之基礎建設挑戰 全球氣候變遷與減碳協議的推進，促使各國加速能源結構的重塑。

濱海極端鹽害環境下電廠管線工程可靠度研究：以西部麥寮燃氣電廠為例之冷作彎管與傳統電銲工法全生命週期效益分析 (A Comprehensive Life-Cycle Cost-Benefit Analysis of Cold-Bending and Conventional Welding Methods for Power Plant Piping Engineering in Extreme Coastal Saline Environments: A Case Study of the Mailiao Gas-Fired Power Plant in Western Taiwan) 閱讀全文 »

基於 2025/2026 ASME B31.1 與 B31J 最新規範複循環機組動力管線冷作彎管應力強度因子（SIF）優化與疲勞壽命分析    (Optimization of Stress Intensification Factors (SIF) and Fatigue Life Analysis for Cold-Bent Power Piping in Combined Cycle Power Plants Based on the Latest ASME B31.1 and B31J Codes)

Uncategorized /

一、 緒論與研究背景 在全球能源轉型與淨零碳排（Net Zero）的總體宏觀政策驅動下，現代電力網路的結構正經

基於 2025/2026 ASME B31.1 與 B31J 最新規範複循環機組動力管線冷作彎管應力強度因子（SIF）優化與疲勞壽命分析    (Optimization of Stress Intensification Factors (SIF) and Fatigue Life Analysis for Cold-Bent Power Piping in Combined Cycle Power Plants Based on the Latest ASME B31.1 and B31J Codes) 閱讀全文 »

針對高階合金鋼管冷作彎管製程與數位化管理之綜合研究：以 ASME 規範與工業 4.0 為基礎 (A Comprehensive Study on the Cold Bending Process and Digital Management of High-Alloy Steel Pipes: Based on ASME Codes and Industry 4.0)

Uncategorized /

摘要 在現代超臨界（Ultra-Supercritical, USC）火力發電廠、先進石化工業與綠能基礎設施的

針對高階合金鋼管冷作彎管製程與數位化管理之綜合研究：以 ASME 規範與工業 4.0 為基礎 (A Comprehensive Study on the Cold Bending Process and Digital Management of High-Alloy Steel Pipes: Based on ASME Codes and Industry 4.0) 閱讀全文 »

購物車